• Inner diameter pump hose Ø 10mm and 20 mm
• Number of revolutions (continuous) 10 up to 75 rpm
• Capacity per revolution 120 ml/rev. with the 20mm
• Maximum discharge pressure 5 bar - 500 kPa
• Maximum product temperature 40 °C
• Starting torque* 300 Nm
• Running torque [500 kPa]* 50 Nm

Features
Highly suitable for:

• Hydrocarbons, oils, solvents, acids and bases
• Shear sensitive products
• Viscous products
• Abrasive and high density products
• Vacuum situations
• Can run dry continuously
• Most suitable for handling shear sensitive products
• Accurate (+1%) dosing (metering) capabilities
• Smooth liquid passage without valves, dead corners or glands
• The material to be pumped does not contact mechanical parts or seals
• Easy maintenance, low cost, short down time
• Only one wearing part: the hose
• Reversible rotation
• No metal contact or valves
• No internal back flow (slip)
• Self priming to 95% vacuum
• One year comprehensive

Low noise level, 100% positive flow (no slip). Metering pump accuracy after 100 hrs: +/- 1% Intermittent duty allows a maximum of two hours operation followed by a minimum one hour stop.